Halvarssons Safety Jacket - Level 2

Halvarssons safety jacket - Level 2

Halvarsson safety

Halvarssons Safety is a flexible collection of safety-tested motorcycle clothing, developed in close cooperation with the British police. These garments have gone through rigorous tests and been approved to the EU standards EN 13595-1 to EN 13595-4. Halvarssons Safety is at the absolute forefront when it comes to two-wheel safety. The Czech and the British police forces agree, as they use exactly this equipment.

Halvarsson safety Halvarssons Safety is a flexible collection of safety-tested motorcycle clothing, developed in close cooperation with the British police. These garments have gone through rigorous tests and been approved to the EU standards EN 13595-1 to EN 13595-4. Halvarssons Safety is at the absolute forefront when it comes to two-wheel safety. The Czech and the British police forces agree, as they use exactly this equipment.

Combine your wardrobe Halvarssons Safety is a highly functional system, where the wearer is able to modify his clothes according to his needs. For the desired safety or for a special function. The basis are the Safety Jacket and the Safety Pants, both protective inner garments of ventilated HI-ART®. These also hold the CE approved protectors and the jacket is also prepared for the CE approved back protector Back Converter. These garments can be combined with outer garments, according to your needs. This means the wearer has access to two different jackets with two different qualities, one wind and waterproof and one that is ventilated.

Safety Jacket Level 2

• Inner jacket in HI-ART®
• Can be zipped to pants. HI-ART®
• Temperature regulating liner. Outlast® liner, detachable
• Adjustable CE approved protectors
• CE approved Back Converter can be fitted
• sizes - Men’s 48-60 Ladies’ 38-44
• EN 13595-1 to EN 13595-4

Protective clothing for professional motorcyclists – jacket, pants and one-piece suit

The standard for protective clothing is directed at those categories, who move in traffic most of the time, professional drivers and riders. For all who want the best protection, this standard is of particular interest. Except abrasions tests, there are also high demands on fit and shape of the clothing. An important aspect is that the clothes should fit as they are designed to be, even in an accident situation. The standard has two levels: „Level 1“ is the somewhat simpler variety, affording some protection. „Level 2“ is somewhat harder and demands more of the clothes.

Test method: Several tests are made, including resistance against abrasion and impact, but also burst strength. In the abrasion tests, the clothing is simply held against a rotating grinder and the time that the material will hold out measured. Normal textile fabric is gone in less than half a second. For „Level 1“ zones 1 and 2 (the most endangered on the body) must hold out 4 seconds. For „Level 2“ zones 1 und 2 must hold 7 seconds! This about corresponds to the time the rider glides on the ground after a fall at 110 km/h. How deep the tip of a knife with a certain force can penetrate the material is measured with the penetration resistance. The clothing is stretched to measure the burst strength, until material, zipper or its seams tear apart. A certain pressure monitors the indicated limit.

Do not hesitate to ask us, if you have questions on the Safety System.

Breeze - ventilated over jacket

New Ventilated outer jacket in Polytex. Adapted for Safety Jacket Level 1 and Level 2.

• Ventilated Mesh
• Mesh liner
• Adjustable width, sleeves and jacket
• Reflective seams
• String adjustment at hem

Teflon - Water and wind proof over jacket

Outer jacket in Polytex, adapted for Safety Jacket Level 1 and Level 2. Detachable stripes across the chest allow different colour choices. All four alternatives are part of the package, red, black, yellow and blue. Water and windproof.

• Dryway+® membrane
• Mesh liner
• Adjustable width, sleeves and jacket
• Ventilation openings
• Reflective seams
• String adjustment at hem

Interchangeable coloured front and rear panels

Halogen - flourescent wind and waterproof over jacket

Jacket in polyester. Adapted as accessory for Safety Jacket Level 1 and Level 2. Water and windproof.

• Dryway+® membrane
• Highly visible
• Adjustable width, sleeves and jacket
• CE approved protectors can be fitted
• Reflective seams
• String adjustment at hem

If you would like to share your experiences or find out more about this product, please add your comments to the forum.