GERBINGS BATTERY AND CHARGER KIT
For Use with Pre 2019 Models
The listed duration time for each battery will power these products with a continuous draw. The use of either a Temp-Controller or an on/off switch, regulates the heat output, which greatly reduces the overall power draw and extends battery use per charge. Our lithium battery packs come with built-in temperature control that allows you to adjust the heat output level and increase your battery life per charge.
Remember that battery capacity decreases in very cold weather, especially if the battery is not insulated, and is left exposed to the elements. At less than 32 degrees Fahrenheit a battery may only produce 80% of its capacity.
WARNING: It is important that you charge your battery regularly and that you maintain at least 25% of your battery power when not in use or left idle. Batteries must only be used with products with an amp rating less than the maximum capacity output rating for the battery. Lithium battery packs can be recharged at any time.
The 4 Ah Lithium Polymer 12v battery pack weighs less than 11 ounces and can power Gerbing’s 12v heated gloves (maximum 48 watts (4 amps) draw). The battery comes in with a built-in five-level temperature controller and a power level indicator that displays how much charge remains in the battery. The charger will charge the battery in approximately 5 hours and be recharged for hundreds of cycles. Charger sold separately.
NOTE: SOLD IN PACKS OF TWO AS ONE BATTERY NEEDED PER GLOVE.
2 x 12v Lithium Polymer 4 Ah Battery: 0.6 lbs, 3.5″ x 3″ x 1″
Includes the Gerbing Battery Charger.