Gerbings Chest Size Guide
Heating pads on the chest, back, collar, and sleeves.
Compressible, water-repellent, durable, Thinsulate® insulation soft shell.
Inside and outside pockets.
Silky-soft micro denier collar.
Firm-fitting patterns and sizing to fit snugly and easily under your outer motorcycle garments.
Built-in sleeve plugs to enable Gerbing gloves to be directly fitted to, and powered from, the jacket liner.
Glove plug pockets in sleeves to secure the glove plugs when not in use.
2 dual-wiring circuits to enable gloves and any other Gerbing product to be controlled independently from the jacket (if used with temperature controller).
Lifetime warranty on heating elements.
Battery harness included
The 2020 MicroWirePRO® Gerbing Premium Heated Jacket Liner still retains all of the fantastic features of the old model, but now offers customers a more tailored compression fit, with even more of our patented heating wire distributed throughout the front and back of the jacket, the collar, and the sleeves. A stretch material down each side of the body and the inside of each arm ensures an extremely comfortable, snug fit, but with full stretch to prevent the chances of bulking under your outer jacket. It is recommended this jacket liner is worn with a long-sleeved base layer underneath. With over 35 meters of heating wire in our heated jacket liner, we guarantee that you will be kept warm, even in sub-zero temperatures!
This top-of-the-range heated jacket liner has 3 input connections situated inside the front pocket which, when used with one of the temperature controllers, will allow the wearer to regulate the heat settings. The first plug draws the power for the heated jacket liner. The second is the power draw plug for Gerbing MicroWirePRO® heated gloves, which can be connected to the sleeves of the jacket liner. The third plug is the accessory plug, which can be connected to your heated trousers and/or heated socks.
Gerbing’s Premium heated motorcycle jacket liner can also be powered from our powerful 10Ah battery.
Constructed from a soft, wind-resistant nylon shell, this tailored jacket is designed to be a lightweight and highly compressible garment – the perfect item to pack for those trips with unpredictable weather conditions.
***IMPORTANT – PLEASE NOTE***
Used with just the battery harness, this jacket will operate at maximum heat, which unless used in extremely cold climates, will be too hot and could cause skin discomfort unless disconnected. In order to adjust the temperature, you will need a Gerbing temperature controller.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.